Table 1-1 Example Node Id Switch S2 Rfm-5565; Table 1-2 Switch S1 Configuration Rfm-5565 - GE PCIE-5565PIORC* Hardware Reference Manual

NOTE
S1 position 8 should be set in the ON position only when a flash update of the control logic has
failed. After a successful flash update of the control logic, S1 position 8 should be set in the OFF
position.

Table 1-1 Example Node ID Switch S2 RFM-5565

S2 S2 S2
Position 8 Position 7 Position 6
ON ON ON
ON OFF OFF
OFF ON OFF
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
Factory Default: S2 positions 1 through 8 OFF

Table 1-2 Switch S1 Configuration RFM-5565

Position 1 OFF (non-redundant mode)
Position 1 ON (redundant mode)
Position 5 OFF (disables Rogue Master 0)
Position 5 ON (enables Rogue Master 0)
Position 8 OFF (most recent control logic)
Position 8 ON (original factory control logic)
PCI Window Size S1 Position 3
Default Off
64 MByte On
16 MByte Off
2 MByte On
S2 S2 S2
Position 5 Position 4 Position 3
ON ON ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
OFF ON OFF
OFF OFF ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
Position 2 OFF (higher performance achievable)
Position 2 ON (low network usage)
Position 6 OFF (disables Rogue Master 1)
Position 6 ON (enables Rogue Master 1)
Factory Defaults
Positions 1-8 OFF
S1 Position 4
Off
Off
On
On
S2 S2 Node ID
Position 2 Position 1 Hex (Dec.)
ON ON $FF (255)
OFF OFF $80 (128)
OFF OFF $40 (64)
OFF OFF $20 (32)
OFF OFF $10 (16)
OFF OFF $8 (8)
OFF OFF $4 (4)
ON OFF $2 (2)
OFF ON $1 (1)
OFF OFF $0 (0)
Handling and Installation 17