4-6
Creasing Units Are Locked
If the creasing units are locked, release the creasing units by following the procedure below.
1
Open the register transport section cover and check the position of the
jammed sheet.
2
Set the creasing depth adjusting dials to "1."
3
Pull the jammed sheets. Be careful not to tear the sheets. If you cannot
pull out the sheets, the creasing units are locked.
4
Turn the handwheel for 1st
creasing unit clockwise to re-
lease the 1st creasing unit.
5
Turn the handwheel for 2nd
creasing unit counterclockwise to
release the 2nd creasing unit.
6
Turn the transport handwheel
counterclockwise to transport the
jammed sheets.
7
Return the creasing depth adjusting dials to the original positions.
8
Close the register transport section cover.
→
When you use thick sheets and the creasing units are locked frequently, see page 72 and set the
creasing depth shallower.
94
13130
40601A1
13130
40601B1
13130
40601C1
CRF-362