Table of Contents
Advertisement
3-3
Adjusting the Fold Section
After adjustment, do a test feed and check that the fold section is adjusted correctly.
3-3-1
Adjusting the Fold Position
Adjust the fold position if the fold position is shifted parallel against the crease or the sheet is not folded on the
crease.
• If a crease position is changed when the gang crease and fold setting is on, the fold position is also
changed automatically.
• If sheets are not folded on a crease, turn off the gang crease and fold setting and then adjust the fold
position. If sheets are still not folded on a crease, check that fold rollers are not dirty and the roller gap is
even on both sides.
When using the Creasing for Cover Mode
1
Press
or
2nd fold position setting.
•
Each time a button is pressed, the value
changes by 0.1 mm/0.004".
When using the Creasing and Fold Mode
1
Press
or
2nd fold position setting.
•
Each time a button is pressed, the value
changes by 0.1 mm/0.004".
74
for the 1st or the
for the 1st or the
Adjust the positions
of the 1st fold.
Adjust the positions
of the 1st fold.
Adjust the positions of
the 2nd fold.
Adjust the positions of
the 2nd fold.
CRF-362
Advertisement
Table of Contents
