Table of Contents
Advertisement
Error Code
Calendar Error
8001
Compact Flash Connection
Error
8010
Compact Flash Saving Error
8020
Compact Flash Loading Error
8021
Previous Job Loading Error
8022
Counter Range Error (Panel)
8030
Previous Job Loading Error
8031
Job Data Range Error
8032
Factory Setting Data Range
Error
8033
Panel Setting Data Mismatch
Error
8034
Service Parameter Setting
Mismatch Error
8037
Home Position Value Range
Error
8038
Administrator Setting Range
Error
8039
Input Signal Enable / Disable
Setting Mismatch Error
8040
Motor Enable / Disable Set-
ting Mismatch Error
8041
CRF-362
Description
Reset the year, month, day, hour, and minute using the Information
screen. Turn off the power and turn it on again.
If the same error occurs repeatedly, call your local dealer.
If the same error occurs repeatedly, call your local dealer.
If the same error occurs repeatedly, call your local dealer.
Set up the Information - Administrator - Administrator Setting screen
again. Then, turn off the power. Wait about 30 seconds and turn on the
power again. If the same error still occurs, call your local dealer.
Set up the Information - Administrator - Input Signal Enable/Disable
Settings screen again. Then, turn off the power. Wait about 30 seconds
and turn on the power again. If the same error still occurs, call your lo-
cal dealer.
Set up the Information - Administrator - Motor Enable/Disable Settings
screen again. Then, turn off the power. Wait about 30 seconds and turn
on the power again. If the same error still occurs, call your local dealer.
If an Error Code Is Displayed
Causes and Solutions
87
Advertisement
Table of Contents
