Table of Contents
Advertisement
Adjusting the Fold Section
2
Insert a strip of the sheet into the
front of the exit.
3
Open the front cover.
4
Hold the sheet strip between the
rollers and turn the handwheel
clockwise and feel the drag on
the strip.
5
Pull out the sheet strip, and
check that the sheet strip is not
torn.
6
Insert a strip of the sheet into the
rear of the exit. Repeat step
5
and
. Check that the drag on the
strip is same on both sides.
If the drag is not same.
Turn the front and rear roller gap adjusting
knobs to make the roller gap even on both
sides.
76
Strip of Sheet
Front
Cover
4
Strip of Sheet
Exit
Transport
Handwheel
13130
30303B1
13130
30303C1
13130
30303D1
13130
30303E1
CRF-362
Advertisement
Table of Contents
