Table of Contents
Advertisement
1-3-22
Information - Administrator - Input Signal Enable/Disable Settings Screen
If a sensor is not working correctly, you can turn off the sensor as an emergency measure.
If you want to turn off one of these sensors, contact a service technician for detailed instructions.
1
2
3
4
5
6
1
Sheet Leading Edge Detection for
2nd Fold
If you turn this signal off, the sheets may not be
folded on the set position.
2
Double Feed Sensor Error
Detection
If you turn this signal off, the machine keeps run-
ning even if a double feeding occurs.
3
Upper Exit Sheet Pass Detection
If you turn this signal off and do a folding job,
the machine does not detect the sheet delivery.
Therefore the machine continues running even if
the sheets are jammed.
CRF-362
Attention
If any devices are disabled (Off), the Input
Signal Enable/Disable screen will be dis-
played every time you turn on the power.
4
Lower Exit Sheet Pass Detection
If you turn this signal off and do a creasing job
only, the machine does not detect the sheet de-
livery. Therefore the machine continues running
even if the sheets are jammed.
5
Transport Section Sheet Detection
If you turn this signal off, the machine does not
detect the transported sheets. Therefore the
machine continues running even if the sheets are
jammed.
6
Go to the Information - Main
Screen
Screen Descriptions
45
Advertisement
Table of Contents
