Table of Contents
Advertisement
Screen Descriptions
1-3-7
Run - Fine Adjustment - Creasing and Fold Screen
1
2
8
Fold Setting Display
1
This indicates the fold pattern which is selected
on the Setting - Mode Selection screen.
2
Fold Position Settings
This indicates the sheet fold positions. These values are calcu-
lated based on the settings set on the Setting - Mode Selection
screen.
You can adjust the crease positions by press
3
Sheet Total Length
This indicates the total length of the sheet set on
the Setting - Mode Selection screen.
4
Crease Position Settings
These values are calculated based on the settings set on the
Setting - Mode Selection screen.
You can adjust the crease positions by press
5
Change Settings Back to Default
When this button is pressed, the settings on this
screen are reset to default.
6
Go to the Run - Fine Adjustment -
Manual Screen
When this button is pressed, the settings on this
screen are saved and the Run - Fine Adjustment -
Manual Screen is displayed.
30
9
10
7
8
or
.
9
or
.
10
11
11
Gang Crease Setting (Only when
making double parallel fold)
If either of creases is changed when this setting is
on, the other is also changed automatically.
Gang Crease Setting turns on.
Gang Crease Setting turns off.
Fold Setting
This is set automatically based on the settings set
on the Setting - Mode Selection screen.
You can change the setting by pressing buttons.
OFF: The sheets are not folded.
2:
The sheets are folded once only by the 2nd fold unit.
1+2: The sheets are folded by the 1st and 2nd fold units.
The sheets are folded twice in total.
Gang Crease and Fold Setting
If either the fold position or the crease position is
changed when this setting is on, the other is also
changed automatically. Select off when you want to set
the fold position and the crease position individually.
Creasing Setting
Turn this mode off when folding thin sheets with-
out creasing.
Positive/Negative Reverse Mode
Normally, a negative crease is placed on the mountain
fold position and a positive crease is placed on the val-
ley fold position. Turn this mode off when reversing the
creases.
3
4
5
6
7
CRF-362
Advertisement
Table of Contents
