Creasing Cover Sheet For Binding - Horizon Fitness CRF-362 User Manual

2-3

Creasing Cover Sheet for Binding

This section explains the procedure for creasing cover sheets for binding. In the following example, the creasing
pattern " Corner and Hinge" is selected, and the registering point of the cover sheet is the center of spine.
1
Press .
→
The Setting - Mode Selection screen is dis-
played.
2
Press .
→
The lower part of the screen becomes ac-
tive and you can set the cover sheet pattern
and the cover sheet registering point.
3
Select
pattern setting.
4
Select
registering point setting.
5
Press
size setting.
→
The Numeric Keypad screen is displayed.
6
Enter the cover sheet length.
•
Available range:
No Flap
Left or Right Flap
Double Flaps
CRF-362
for the cover sheet
for the cover sheet
for the cover sheet
:180 through 865 mm/
7.090" through 34.055"
:291 through 865 mm/
11.690" through 34.055"
:360 through 865 mm/
14.110" through 34.055"
Cover Sheet
Cover Sheet Regis-
Pattern Set-
tering Point Setting
ting
Input the cover
sheet length.
Cover Sheet
Size Setting
Enter the cover
sheet length.
53