Horizon Fitness CRF-362 User Manual page 93

Fold position is not adjusted correctly
Follow the procedure below and adjust the fold position.
1
Fold a sheet without creasing.
•
Check the gap between the set value and the actual folded position.
2
Adjust the fold position.
•
Turn off the gang crease and fold setting and
then adjust the fold position to match the crease
position.
•
Press and enter the correct fold posi-
tion by referring the example below.
Example:
In case that the actual 1st fold position is 278
mm away from the sheet leading edge, the
1st fold position is 3 mm shorter than the set
value (= 281 mm). Therefore, increase 3 mm
to the set value (= 284 mm).
In case that the actual 2nd fold position is
144.0 mm, the 2nd fold position is 2 mm
longer than the set value (= 142 mm). There-
fore, decrease 2 mm from the set value(=
140 mm).
2nd Fold Position
1st Fold Position
3
Fold a sheet with creasing and
check that the sheet is folded on
the crease.
•
If the sheet is not folded on the crease, re-
peat the steps 1 and 2.
CRF-362
Example of the Creasing and Fold Screen (For Letter Fold)
Adjust the positions
of the 1st fold.
13130
40502C1
Fold Is Not Made Correctly
142.0
139.0
281.0
OFF
Adjust the positions of
the 2nd fold.
281.0
93