Cleaning Belts And Fold Rollers; Cleaning The Belts - Horizon Fitness CRF-362 User Manual

5-2

Cleaning Belts and Fold Rollers

If the feed belts and the transport belts are dirty, sheets may not be fed correctly. Also, if the fold rollers are dirty,
sheets may not be folded correctly. Normally, you should check them once a week. And if necessary, clean
them.
5-2-1

Cleaning the Belts

1
Turn off the Power switch.
2
Open the register transport sec-
tion cover.
3
Wipe the feed belts using a dry
cloth while turning the feed belts
to the front.
If the belts are still contaminated, use an
alcohol-soaked cloth.
4
Lift the roller unit and wipe the
transport belts using a dry cloth
while turning the transport belts
to the front.
You cannot lock the roller unit when it is
lifted. Therefore, when you clean the trans-
port belts, support the unit by hand.
5
Close the register transport sec-
tion cover.
CRF-362
Register Transport Section Cover
Feed Belts
Roller Unit
Transport Belts
Pull here to open
the cover.
13130
50201A1
13130
50201B1
13130
50201C1
101