Information - Single Operation Screen - Part 1 - Horizon Fitness CRF-362 User Manual

Screen Descriptions
1-3-17

Information - Single Operation Screen - Part 1

This screen is used to control each mechanism individually.
1
2
3
4
5
6
7
1
M10 M11 Blower Motors
The motor stops running.
Motors start running.
2
M12 M13 Feed Table Up/Down Motor
The feed table stops moving.
Raise the feed table.
Lower the feed table.
3
M14 Feed Belt Drive Motor
The motor stops running.
The feed belts run in the reverse direc-
tion.
The feed belts run in the normal direc-
tion.
4
Y10 Feed Valve
The feed valve closes.
The feed valve opens. If the feed
valve opens while the blower motor is
running, the feed belts pick up sheets
when the blower motor is turned on.
40
5
M15 Feed Section Transport Motor
The motor stops running.
The transport belts run in the reverse
direction.
The transport belts run in the normal
direction.
6
M30 Creasing Section Transport
Motor
The motor stops running.
The transport mechanism after the
creasing section runs in the reverse
direction.
The transport mechanism after the
creasing section runs in the normal
direction.
7
Go to the Information - Main
Screen
CRF-362