3-1
Adjusting the Feed Section
Adjust the feed section to feed sheets smoothly without mis-feeding or double feeding.
3-1-1
Adjusting the Sheet Height
Adjust the sheet height to feed the sheets smoothly.
If double feeding occurs
Lower the sheet height adjusting lever gradually.
If mis-feeding occurs
Raise the sheet height adjusting lever gradually.
How to adjust the sheet height from the
standard position
• Lower the sheet height adjusting lever to
the lower limit and raise it gradually.
When the sheet width is 120 mm/4.72" or shorter
Loosen the sheet height sensor locking knob.
Then move the sheet height sensor to the operator side.
66
Sheet Height
Adjusting Lever
13130
30101A1
Sheet Height
Adjusting Lever
13130
30101B1
Sheet Height Sensor
Locking Knob
13130
30101A3
CRF-362