Table of Contents
Advertisement
Screen Descriptions
1-3-13
Memory - Job Details - Creasing for Cover Screen
1
2
3
9
1
Job Name
This indicates the job number, job name and the
date of update from left to right.
2
Cover Sheet Registering Point
Setting
The registering point of the cover
sheet is set to the center of spine.
The registering point of the cover
sheet is set to the corner of spine.
3
Fold Position Settings
This indicates the sheet fold positions.
4
Cover Sheet Pattern Setting
The selected cover sheet pattern is displayed.
5
Flap Length
This indicates the length of the left and right flaps.
6
Registering Point Distance
This indicates the distance between the register-
ing point and the sheet edge.
7
Flap Distance
This indicates the distance between the corner of
the spine and the flap.
36
10
11
7
12
8
Spine Width Setting
This indicates the spine width.
9
Go to the Memory Screen
Press this button to return to the Memory screen.
10
Fold Setting
This indicates the fold setting.
OFF: The sheets are not folded.
2:
The sheets are folded once only by the 2nd
fold unit.
1+2: The sheets are folded by the 1st and 2nd
fold units. Totally the sheets are folded twice.
11
Gang Crease and Fold Setting
This indicates whether the crease position and the
fold position are ganged.
ON: The crease position and fold position are
ganged.
OFF: The crease position and fold position are not
ganged.
12
Positive/Negative Reverse Mode
This indicates whether the positive/negative re-
verse mode is on or off.
ON : Creases are reversed.
OFF: Creases are not reversed.
4
5
6
7
8
CRF-362
Advertisement
Table of Contents
