Horizon Fitness CRF-362 User Manual page 85

Error Code
Creasing Section Jam
(Sensor B30 is on before
operation.)
401
Too Many Sheets Are De-
tected in Fold Section
410
When Sheet Is Folded
Fold Section Jam
(The sheet did not arrive at
500
sensor B43.)
When Sheet Is Folded
Fold Section Jam
(Sensor B43 is on before
501
operation.)
When Sheet Is Folded
Fold Section Jam
(The sheet did not arrive at
sensor B50.)
600
When Sheet Is Creased Only
Fold Section Jam
(The sheet did not arrive at
sensor B51.)
601
When Sheet Is Folded
Delivery Section Jam
(Sensor B50 is on before
operation.)
602
When Sheet Is Creased Only
Delivery Section Jam
(Sensor B51 is on before
operation.)
603
CRF-362
Description
A sheet was detected when
Remove the sheet. If this error code is displayed even though no
sheets are jammed, the sensor may be dirty. Check that the sensor
works properly using the Information - Monitor screen.
(See page 39 .)
Before the folding of a sheet was finished, the next sheet was detected
by the B30 creasing section sheet leading edge sensor.
Remove the sheet.
If the same error occurs repeatedly, set the transport interval larger.
(See page 70 .)
A jam has occurred in the fold section. Remove the sheet. (See page
95 .)
If the same error occurs repeatedly, see page 90 and solve the
problem. Check if the fold rollers are not dirty. If necessary, clean the
rollers. (See page 102 .)
A sheet was detected when
Remove the sheet. (See page 95 .)
If this error code is displayed even though no sheets are jammed, the
sensor may be dirty. Check that the sensor works properly using the
Information - Monitor screen. (See page 39 .)
A jam has occurred in the fold section or the upper delivery section.
Remove the sheet. (See page 95 .)
If the same error occurs repeatedly, see page 90 and solve the
problem.
Check if the fold rollers are not dirty. If necessary, clean the rollers.
(See page 102 .)
Check that the roller gap is set correctly. (See page 75 .)
A jam has occurred in the fold section or the lower delivery section.
Remove the sheet. (See page 95 .)
If the same error occurs repeatedly, see page 90 and solve the
problem.
Check if the fold rollers are not dirty. If necessary, clean the rollers.
(See page 102 .)
A sheet was detected when
Remove the sheet.
If this error code is displayed even though no sheets are jammed, the
sensor may be dirty. Check that the sensor works properly using the
Information - Monitor screen. (See page 39 .)
A sheet was detected when
Remove the sheet.
If this error code is displayed even though no sheets are jammed, the
sensor may be dirty. Check that the sensor works properly using the
Information - Monitor screen. (See page 39 .)
If an Error Code Is Displayed
Causes and Solutions
is pressed.
is pressed.
is pressed.
is pressed.
85