1-3-4
Run - Settings Screen
1
2
3
1
Feed Belt Suction Length
This sets the feed belt suction length.
If the feed belt suction length is too long
although the sheet length is short, it is auto-
matically corrected to a short suction length
when the OK button is pressed on the Set-
ting - Mode Selection screen.
2
Transport Speed
This sets the transport speed.
3
Transport Interval
This sets the transport interval.
CRF-362
4
Double Feed Detection
This sets whether to detect double feeding.
Select off if you do not want to use double feed
detection.
Screen Descriptions
4
27