Table of Contents
Advertisement
1-3-10
Run - Fine Adjustment - Manual Screen
1
7
1
Fold Position Settings
This indicates the sheet fold positions. Press this
value box and enter the fold positions.
You can change the fold positions by pressing
or
.
2
Crease Position Settings
These indicate crease positions. The value is the
distance between the crease and the front edge
of the sheet. Press these value boxes to enter the
crease positions.
3
Crease Setting
Place a positive crease.
Place a negative crease.
4
Crease Setting Disable Mode
When this button is pressed and turned blue, the
crease setting on the same line is disabled.
CRF-362
2
3
4 5 6
8
9
5
Repeat
When this button is pressed and turned blue,
you can make creases on a sheet repeatedly at
equally-spaced intervals. The distance between
creases is set by the crease position setting.
This function can be used only for one crease
position setting.
6
Repeat Number
Press this value box and the Numeric Keypad
screen appears. Enter the number of times that
you want to make creases on a sheet.
7
Fold Setting
OFF: The sheets are not folded.
2:
The sheets are folded once only by the
2nd fold unit.
1+2: The sheets are folded by the 1st and 2nd
fold units. Totally the sheets are folded twice.
8
Page Selection
Press this button to go to the other Run - Fine
Adjustment - Manual screen.
9
All Clear Button
When this button is pressed, the settings on this
screen are reset to default.
Screen Descriptions
33
Advertisement
Table of Contents
