Run - Fine Adjustment - Creasing For Cover Screen - Part 1 - Horizon Fitness CRF-362 User Manual

1-3-8

Run - Fine Adjustment - Creasing for Cover Screen - Part 1

1
2
1
Cover Sheet Pattern Display
This is the pattern selected on the Setting - Mode
Selection screen.
2
Fold Position Settings
This indicates the sheet fold positions. The sheet
is folded on these positions to make flaps. These
values are calculated based on the settings set on
the Setting - Mode Selection screen.
You can change the fold positions by pressing
or .
3
Registering Point Display
4
Registering Point Distance
This indicates the distance between the register-
ing point and the sheet edge.
You can change the fold positions by pressing
or .
5
Flap Length
This indicates the length of the left and right flaps.
CRF-362
6 8
6
Flap Distance
This indicates the distance between the corner of
the spine and the flap.
You can change the distance by pressing
.
7
Spine Width Setting
This sets the spine width. Press this value box
and enter the spine width.
You can change the spine width by pressing
or .
8
Flap Setting
If either the left or the right flap length is changed
when this setting is on, the other is also changed
automatically. Select off when you want to set the
left or the right flap length individually.
Screen Descriptions
3
4
5
6
7
or
31