3-2
Adjusting the Creasing Section
After adjustment, do a test feed and check that the creasing section is adjusted correctly.
3-2-1
Adjusting the Crease Position
Adjust the crease position if the crease is not made in the set position.
If a crease position is changed when the gang crease and fold setting is on, the fold position is also
changed automatically.
When using the Creasing for Cover Mode
1
Press
or
crease position.
•
Each time a button is pressed, the value
changes by 0.1 mm/0.004".
When using the Creasing and Fold Mode
1
Press
or
crease position.
•
Each time a button is pressed, the value
changes by 0.1 mm/0.004".
CRF-362
to adjust the
to adjust the
Adjust the values.
Adjust the values.
71