Alarm Sensor (Dk40I And Dk424 Only); Alternate Answer Point; Amplified Conference Interface; Auto Attendant (Built-In) - Toshiba Strata DK14 General Description Manual

Features
System Features

Alarm Sensor (DK40i and DK424 only)

Both the PIOU and PIOUS option interface PCBs have a sensor that can be connected to a
customer-supplied alarm system. If the alarm is activated, the sensor triggers a loud alert tone to all
digital and electronic telephones. Any station programmed with an
alert tone.

Alternate Answer Point

Users can answer a transferred outside line call from any station that has the
Secondary [DN] for the destination station.

Amplified Conference Interface

Provides interface for a customer-supplied amplifier to improve low volume levels due to losses
on some CO lines. The amplifier is not dedicated to certain CO lines (it is shared by all CO lines)
and automatically connects to calls that include two CO lines: for example, DISA, conferencing
and external call forward.
This amplifier provides a louder sound level on these types of calls and requires two circuits on a
PEKU or PESU PCB installed in the Strata DK per amplifier. A maximum of two (DK40i) or four
(DK424) amplifiers per system can automatically connect to any two CO line conference. This
feature is available for the Strata DK40i and DK424.

Auto Attendant (Built-in)

The built-in AA feature acts as an operator that automatically directs incoming calls to stations.
Strata DK provides a built-in AA feature via optional feature upgrade keys: QKYS (DK14),
KKYS (DK40i), RKYS1~3 (DK424).
Callers who dial in to assigned Strata DK AA lines can receive a dialing prompt menu, such as,
"Dial 5 for Sales, dial 6 for Tech Support." When the caller dials the digit, the call routes to a
[DN], ACD group, or Distributed Hunt group (assigned in system programming).
AA can be programmed to answer CO line calls immediately or with a delayed ring option. AA
can pick up unanswered calls that ring for either 12 or 24 seconds at selected stations. An
unlimited number of CO lines can be assigned for built-in AA. Built-in AA applies to loop and
ground start CO lines only; it does not answer Tie or DID line calls.
Built-in AA enables access to outgoing lines via DISA, which should be security protected with
account codes and/or a DISA security code.
The AA feature requires customer-provided digital announcement device(s) and optional QRCU3
(DK14), K5RCU (DK40i) or RRCS (DK424) tone receiver PCBs. Callers can be connected to one
digital announcer simultaneously. One DTMF receiver is needed per caller.
DK14 enables up to three caller connections
DK40i enables up to five caller connections
DK424 allows up to 24 caller connections
Auto Attendant is licensed by Dytel, Inc. under United States Patent No. 4,975,941.

Automatic Call Distribution (ACD) (DK424 only)

With an optional feature upgrade key (RKYS2~3) connected to an RCTU processor, stations in the
DK424 can be arranged in ACD groups. Such an arrangement enables incoming calls over a CO
line to be distributed among a group of ACD Agents. This is ideal where a number of staff
members receive the same type of calls, since calls can be automatically distributed.
62
$ODUP
button can turn off the
/LQH
button or a
Strata DK General Description 5/99