Station Message Detail Recording (Smdr) - Toshiba Strata DK14 General Description Manual

Features
System Features

Station Message Detail Recording (SMDR)

SMDR prints call records of both incoming and outgoing calls or outgoing calls only. Strata DK
systems can also print a call record of outgoing toll calls only. Calls of less than one or ten seconds
(programmable option) are not recorded. The basic SMDR printout includes:
Time and duration of the call
Time to answer the call
Stations to which the call was transferred
Type of call – all calls, outgoing only, and toll
Station number that made the call
DN of the destination
Account codes (if the system has been programmed to include)
ANI, Caller ID, and DNIS/DID/Tie numbers/names (if the system has been programmed to
include)
If present, the names take the place of the system Account Codes. A sample of the SMDR output
for outgoing calls is shown in
SMDR is supported in each system as follows:
DK14 – requires the WSIU, equipped with an RS-232C connector for attachment to a
customer-provided printer or recording device. Data output speed can be set at 300 or 1200
bps.
DK40i – requires the TSIU, PIOU or PIOUS, equipped with an ASCII RS-232, 6-wire
modular connector, compatible with most call accounting devices.
DK424 – requires the PIOU, PIOUS, RSSU, or RSIU, equipped with an ASCII RS-232 6-wire
modular connector and compatible with most call accounting devices.
The DK40i and DK424 also require a PPTC connector that converts a 6-wire, modular connection
to a 25-pin connection (DB-25) and is available from Toshiba.
98
Figure 5.
System Availability
Optional on Strata DK14/DK40i/DK424
Requirements
DK14 - WSIU
DK40i - TSIU in base; PIOUS or PIOU in
expansion
DK424 - PIOU, PIOUS, RSSU, or RSIU
Strata DK Feature Description 5/99