Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 80

BODY CONSTRUCTION -
SILENCER APPLICATION LOCATIONS
Silencers (MD - 12 and melting sheets) are attached to the top of the floor to reduce vibration and insulate
against the heat from exhaust gas.
NOTE
MD - 12 is a high performance sheet composed of asphalt applied with mica and thermosetting resin for
improving anti-vibration performance.
<RS-II>
<RS>
: 1.6 mm thick melting sheet
: 3.2 mm thick melting sheet (Place two 1.6 mm melting sheets one on top of another.)
: 4.0 mm thick MD- 12 (Place three 1.6 mm melting sheets one on top of another.)
NOTE
The number in the parentheses indicates the number of melting sheet
used for repair.
Silencer Application Locations
A-21