Mitsubishi Electric MELSEC iQ-R Series User Manual page 262

No. Name
SW0110 to CPU minor error
SW0117 status of each station
SW0160 to Execution result of
SW0167 device station
parameter automatic
setting function
SW0194 Detailed execution
result of device
station parameter
automatic setting
SW0198 Link dedicated
instructions
processing result
CH3
SW0199 Link dedicated
instructions
processing result
CH4
SW019A Link dedicated
instructions
processing result
CH5
APPX
260
Appendix 4 List of Link Special Register (SW)
Description
Stores the minor error occurrence status of each station.
0: Normal, or a moderate or major error occurring
1: Minor error occurring
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
SW0110 16 15 14 13 12 11 10
SW0111
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
SW0112
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
SW0113
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
SW0114
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
SW0115
96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
SW0116
112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97
SW0117
Each No. in the table represents a station No.
 is fixed to 0.
(Condition)
• Reserved stations and stations that surpass the maximum station No. are ignored.
• Since a local station cannot obtain the station information of the CC-Link IE TSN Class
A remote station when communicating in multicast mode, "0: Normal, or a moderate or
major error occurring" is reflected to the CC-Link IE TSN Class A remote station.
• When using PLCopen motion control FB mode, if the communication cycle interval
setting is less than 125 μs, the status of each station will be fixed at "0: Normal, or a
moderate or major error occurring".
When the device station parameter automatic setting is completed with an error, the bit of
the target station is turned ON.
OFF: Completed successfully
ON: Completed with an error
When completed with an error, the error code is stored in the SW0194.
When completed with an error caused by the master station, the bit is not turned on.
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
SW0160 16 15 14 13 12 11 10
SW0161 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
SW0162
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
SW0163 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
SW0164
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
SW0165 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
SW0166
112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97
SW0167
Each No. in the table represents a station No.
 is fixed to 0.
When the device station parameter automatic setting is completed with an error, the error
code is stored.
When completed with an error caused by the device station, the bit of the target station of
'Execution result of device station parameter automatic setting function' (SW0160 to
SW0167) is turned ON.
Stores the processing results of the link dedicated instruction that used channel 3 of the
own station.
0: Completed successfully
1 or greater: Completed with an error (Error code is stored.)
Stores the processing results of the link dedicated instruction that used channel 4 of the
own station.
0: Completed successfully
1 or greater: Completed with an error (Error code is stored.)
Stores the processing results of the link dedicated instruction that used channel 5 of the
own station.
0: Completed successfully
1 or greater: Completed with an error (Error code is stored.)
9 8 7 6 5 4 3 2
120 119 118 117 116 115 114 113
9 8 7 6 5 4 3 2
120 119 118 117 116 115 114 113
Availability
PLCopen Simple
Motion Motion
control FB mode
mode
 
1
 
1
 
 
 
 