Removing The Press Roller Unit - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Press Roller Unit > Procedure

Removing the Press Roller Unit

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit. (service position)(Refer to page 4-99)
3) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
4) Remove the Press Unit.(Refer to page 4-102)
■ Procedure
1) Turn the knob [1] in the direction of the arrow to move the Press Roller Unit [2] to the
center.
[1] [2]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Press Roller Unit > Procedure
2) Remove the Delivery Guide (Upper) [1].
• 4 Screws [2]
3) Remove the Handle Cover [1].
• 1 Screw [2]
F-4-259
[2]
[1]
[2]
[2]
[1]
F-4-261
4-105
F-4-260
4-105