Table of Contents
Advertisement
5
Adjustment > Auxiliary Adjustment > Adjusting Position of Saddle Lead Edge Stopper
6) Correct the position of the stopper fixture according to the displacement amount (C) for
folding position that was measured in step 1).
Procedure: Turn the cross-hole screw [1] to adjust the position of the lead edge stopper
fixture [2] upward/downward.
(0.5mm-change per turn)
7) After the adjustment is completed, tighten the fixing screw of the lead edge stopper.
8) Output the paper from the saddle assembly and check the result.
5
Adjustment > Auxiliary Adjustment > Adjusting Position of Saddle Lead Edge Stopper
[2]
[1]
F-5-220
5-93
5-93
Advertisement
Table of Contents
