Removing The Saddle Inlet Roller Static Eliminator - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Inlet Roller Static Eliminator > Procedure

Removing the Saddle Inlet Roller Static Eliminator

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit.
■ Procedure
1) Move the grip [1] in the direction of the arrow to open the Saddle Stack Guide Assembly [2].
[2]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Inlet Roller Static Eliminator > Procedure
[1]
F-4-215
2) Remove the Saddle Inlet Guide [1].
• 2 Screws [2]
[1]
3) Remove the 2 Saddle Inlet Roller Static Eliminators [1].
[2]
[2]
F-4-216
[1]
F-4-217
4-90
4-90