Canon Finisher-AK1 Service Manual page 339

4) Lift the Latch Plate (Front) up and lock it on the cover, and connect the Finisher and the
High Capacity Stacker by fitting the Positioning Pin of the High Capacity Stacker into the
hole on the Positioning Plate of the Finisher.
< Front side >
Latch Plate (Front)
< Rear side >
Positioning Pin Hole
7
Installation > Installation Procedure > Connecting with the High Capacity Stacker
F-7-61
F-7-62
7 Installation > Installation Procedure > Connecting with the High Capacity Stacker
5) Lower the Latch Plate (Front) and fix it.
• 1 Screw (Use the Screw removed in the step 7) of "Before Installing the Finisher")
6) Close the Finisher Front Cover.
7) Move the Latch Plate (Rear) in the direction of the arrow and insert it to the pin to fix it.
• 1 Screw (Use the Screw removed in the step 9) of "Before Installing the Finisher")
Latch Plate (Rear)
Screw
7-23
Latch Plate (Front)
Screw
F-7-63
F-7-64
7-23