Canon Finisher-AK1 Service Manual page 352

3) In the case of the Finisher, remove the Front Caster Cover.
• 1 Screw
4-1) In the case of the Saddle Finisher, remove the knob.
• 1 Screw
4-2) Remove the Saddle Inner Cover (lower).
• 3 Screws
x4
7
Installation > Adjustment > Height Adjustment > Height Adjustment
Screw
F-7-100
Knob
Saddle Inner Cover (lower)
F-7-101
7 Installation > Adjustment > Height Adjustment > Height Adjustment
5) Remove the 2 Caster Covers at the Left side. (Figure shown is the case of using the
Saddle Finisher.)
• 2 Screws
x2
7-36
F-7-102
7-36