Connecting With The Document Insertion Unit - Canon Finisher-AK1 Service Manual

Connecting with the Document Insertion Unit

NOTE:
Be sure the power of the host machine is turned OFF and the power plug is
disconnected from the outlet.
1) IInstall the Latch Receiver (Front) and Latch Receiver (Rear) in the left side of the
Document Insertion Unit.
• 4 Screws (RS tightening; M4x10)
CAUTION:
Confirm the engraved mark on each latch plate when attaching.
• Latch Receiver (Front) : F
• Latch Receiver (Rear) : R
x4
Latch Receiver (Rear)
7
Installation > Installation Procedure > Connecting with the Document Insertion Unit
Latch Receiver (Front)
F-7-76
7 Installation > Installation Procedure > Connecting with the Document Insertion Unit
7-27
7-27