Canon Finisher-AK1 Service Manual page 330

4) Lift the Latch Plate (Front) up and lock it on the cover, and connect the Finisher and the
Multi Drawer Document Insertion Unit by fitting the Positioning Pin of the Multi Drawer
Document Insertion Unit into the hole on the Positioning Plate of the Finisher.
< Front side >
Latch Plate (Front)
< Rear side >
Positioning Pin Hole
7
Installation > Installation Procedure > Connecting with the Multi Drawer Document Insertion Unit
F-7-32
F-7-33
7 Installation > Installation Procedure > Connecting with the Multi Drawer Document Insertion Unit
5) Lower the Latch Plate (Front) and fix it.
• 1 Screw (Use the Screw removed in the step 7) of "Before Installing the Finisher")
6) Close the Finisher Front Cover.
7) Move the Latch Plate (Rear) in the direction of the arrow and insert it to the pin to fix it.
• 1 Screw (Use the Screw removed in the step 9) of "Before Installing the Finisher")
Latch Plate (Rear)
Screw
7-14
Latch Plate (Front)
Screw
F-7-34
F-7-35
7-14