4) Connect the ARCNET Cable to the terminal of the Finisher, and turn the knob in the
direction of the arrow to secure.
5) Install the Wire Saddle on the Rear Cover of the Finisher.
7
Installation > Installation Procedure > Connecting the Cable
F-7-87
F-7-88
7
Installation > Installation Procedure > Connecting the Cable
6) Bundle the ARCNET Cable with the Wire Saddle.
< If connected to Host Machine >
x3
< If connected to Multi Drawer Document Insertion Unit >
7-31
Wire Saddle
F-7-89
Wire Saddle
F-7-90
7-31