Other Parts; Removing The Alignment Roller - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Alignment Roller

Other Parts

Removing the Alignment Roller

1) Remove the saddle cover.
(Refer to page 4-22)
2) Pull out the saddle unit to the service position.
(Refer to page 4-32)
3) Disconnect the connector and release the harness from the wire saddle on the rear of the saddle unit.
x6
x1
4
Parts Replacement and Cleaning Procedure > Other Parts > Removing the Alignment Roller
x3
F-4-173
4-71
F-4-174
4-71