Removing The Disengagement Roller - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Disengagement Roller > Procedure

Removing the Disengagement Roller

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit.
3) Remove the Saddle Stapler.(Refer to page 4-91)
4) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
■ Procedure
1) Remove the Resin Ring [1] and the bearing [2].
[2]
[1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Disengagement Roller > Procedure
2) Remove the Resin Ring [1] and the Belt Retainer [2] on the rear side of the Saddle
Assembly.
3) Remove the belt [1] from the pulley [2].
F-4-224
4-93
[2]
[1]
F-4-225
[1]
[2]
F-4-226
4-93