Installation Procedure
Before Installing the Finisher
1) Remove all the tapes and cardboards attached to the equipment.
2) Open the Finisher Front Cover.
3) Remove the packing tapes.
7
Installation > Installation Procedure > Before Installing the Finisher
F-7-15
F-7-16
7
Installation > Installation Procedure > Before Installing the Finisher
NOTE:
Step 4) to 6) are needed to be performed only for the Saddle Finisher.
4) Release the handle and pull out the Saddle Unit.
5) Remove the packing tapes.
Packing Tape
6) Put the Saddle Unit back.
7-8
Packing Tape
Handle
F-7-17
7-8