7) Remove the Screw on the Latch Plate (Front).
(The removed Screw will be used when connecting the upstream equipment.)
8) Remove the Rear Small Cover in the direction of the arrow.
• 1 Screw
• 2 Hooks
Hook
7
Installation > Installation Procedure > Before Installing the Finisher
Latch Plate (Front)
Screw
F-7-18
F-7-19
7
Installation > Installation Procedure > Before Installing the Finisher
9) Remove the screw on the Latch Plate (Rear) and bring the hinge down toward the front.
(The removed Screw will be used when connecting the upstream equipment.)
Latch Plate (Rear)
Screw
7-9
F-7-20
7-9