Canon Finisher-AK1 Service Manual page 287

5
Adjustment > Auxiliary Adjustment > Adjusting Feeding Distance of Saddle Disengagement Roller > Procedure
3) Pressing switch SW383 [1] or SW384 [2] determines adjustment level.
By pressing SW384 once, the LED [3] indicates "+1" and feeding distance of the paper is
increased as shown in the figure below (+direction).
• Adjustment range: 0 to +59 (2mm-change per unit)
4) Press switch SW385 [1] again to complete this adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+)
5 Adjustment > Auxiliary Adjustment > Adjusting Feeding Distance of Saddle Disengagement Roller > Procedure
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
[1] [2]
ENTER
[1]
F-5-281
F-5-280
5-116
5-116