Table of Contents
Advertisement
6) Move the Latch Plate (Rear) in the direction of the arrow and insert it to the pin to fix it.
• 1 Screw (Use the Screw removed in the step 9) of "Before Installing the Finisher")
Latch Plate (Rear)
Screw
7) Check the height between Finisher and the Perfect Binder.
CAUTION:
Height difference should be within +/- 2 mm.
Execute "Height Adjustment" if the difference is +/- 2 mm or more.
Finisher
8) Install the Rear Small Cover. (1 Screw)
7
Installation > Installation Procedure > Connecting with the Perfect Binder
F-7-72
Perfect Binder
F-7-73
7
Installation > Installation Procedure > Connecting with the Perfect Binder
9) Remove the Rear Cover of the Perfect Binder.
• 5 Screws
x5
10)
Install the Shunt Cable.
• 2 Screws (RS tightening; M4x10)
x2
11)
Install the Rear Cover of the Perfect Binder. (5 Screws)
7-26
F-7-74
F-7-75
7-26
Advertisement
Table of Contents
