Data Used For Control - Mitsubishi Electric MELSEC Q Series User Manual

10 FUNCTION DETAILS

10.22.2 Data used for control

Symbol
Control data Cd.100 Flash ROM write request
Symbol
Monitor data Md.102
Set the following control data for the flash ROM write function.
Refer to Section 6.3 to 6.8 for the buffer memory address and details.
Item
Number of write accesses to flash ROM by the flash ROM write function is stored in
the following buffer memory.
Refer to the Section 6.3 to 6.8 for the buffer memory address and monitoring details.
Item
Number of write accesses to flash
ROM
Write the contents from the buffer memory to the flash ROM
Number of write accesses to flash ROM and the number of parameter
initializations after the system power supply ON can be stored.
10 - 43
MELSEC-Q
Details
Details