10 FUNCTION DETAILS
10.7.2 Data used for control
Symbol
Pr.15
Pr.16
Parameter
Pr.58
Pr.59
Pr.82
Pr.83
Da.2
Positioning data
Da.3
Set the following parameters and control data used for the acceleration/deceleration
control.
Refer to Section 6.3 to 6.8 for the buffer memory address and details.
Item
Acceleration/deceleration method
S-curve acceleration/deceleration
time constant
OPR acceleration time
OPR deceleration time
JOG operation acceleration time
JOG operation deceleration time
Acceleration time
Deceleration time
Select the acceleration/deceleration method.
Set the time constant for S-curve acceleration/deceleration.
Set the acceleration time at the OPR.
Set the deceleration at the OPR.
Set the acceleration time for JOG operation.
Set the deceleration time for JOG operation.
Set the acceleration time.
Set the deceleration time.
10 - 16
MELSEC-Q
Details