Setting Range Of Op Shift Amount - Mitsubishi Electric MELSEC Q Series User Manual

7 OPR CONTROL

7.8.2 Setting range of OP shift amount

(1) OP shift amount is negative value
When a negative value is set in "
opposite direction against of direction set in "
OPR direction
Pr.51
V
OPR start
Zero point
Set " OP shift amount" within the range of from the detected zero point signal to
Pr.60
upper/lower limit switches. If the outside the range is set, an "error code 1500" will
occur and the OPR is not completed.
Setting range of negative
"
Limit switch in the
opposite direction
of OPR
Proximity dog
OPR direction
Pr.51
Zero point
OP shift amount", it moves in the
Pr.60
Pr.60
OP
Proximity dog
OP shift amount"
Pr.60
7 - 15
MELSEC-Q
OPR direction".
Pr.51
Pr.54 OPR speed
OP shift amount
Pr.56
Pr.56
Setting range of positive
" OP shift amount"
Pr.60
Limit switch in the
direction of OPR
Creep speed
Creep speed