Data Set Type - Mitsubishi Electric MELSEC Q Series User Manual

7 OPR CONTROL

7.3 Data Set Type

A method which uses the JOG operation to move to any arbitrary position and then
sets that position as the home position. A proximity dog is unnecessary.
OP is the commanded position at the OPR operation.
V
OPR start
(Positioning start signal ON)
POINT
When the hardware stroke limit is detected at the OPR start, an "error code 1500"
will occur, and the OPR is not completed.
The commanded position
at the OPR start is OP.
7 - 6
MELSEC-Q