Manual Control; Jog Operation - Mitsubishi Electric MELSEC Q Series User Manual

9 MANUAL CONTROL

9. MANUAL CONTROL
"Manual control" refers to control in which positioning data is not used.
The two types (JOG operation, incremental feed operation) of this "manual control"
are explained below.

9.1 JOG Operation

In the JOG operation, the command is output from the QD74MH to the servo amplifier
while "1" is set by setting "1" in "
rotation JOG start", and it makes to move the work piece in the specified direction.
While the positioning start signal [Y10 toY1F] is ON, "forward rotation JOG start" and
"reverse rotation JOG start" for that axis are ignored regardless of positioning
executing.
The feed (unlimited length feed) that exceeds the moveable range cannot be executed using the JOG
operation. Doing so may cause an error with the software stroke limit, and the operation stops.
Forward rotation JOG start" or "
Cd.8
CAUTION
9 - 1
MELSEC-Q
Reverse
Cd.9
9