10 FUNCTION DETAILS
10.15.3 Data used for control
Symbol
Cd.18
Cd.19
Control data
Cd.20
Cd.21
Symbol
Monitor data
Md.10
Set the following control data for the acceleration/deceleration time change function.
Refer to Section 6.3 to 6.8 for the buffer memory address and details.
Item
Acceleration time change request
New acceleration time value
Deceleration time change request Execute the deceleration time change request.
New deceleration time value
Check the following monitor data for the status of the acceleration/deceleration time
change.
Refer to Section 6.3 to 6.8 for the buffer memory address and monitor details.
Item
Status 2
Execute the acceleration time change request.
Set the acceleration time after the change.
Set the deceleration time after the change.
b9: Acceleration time change READY
b10: Deceleration time change READY
10 - 31
MELSEC-Q
Details
Details