GE Dash 3000 Service Manual page 80

4-8
Configuration: Service menus
Service Mode menu options (Continued)
Menu option
MONITOR SETTINGS (cont.)
COPY UNIT DEFAULTS
PRINT TEST PATTERN
TIME AND DATE
WARNING
Loss of patient history. This menu should rarely be used
because patient histories will be lost.
Dash 3000/4000/5000
Description
CONFIGURE WIRELESS LAN

Enable and configure the wireless LAN option. (Refer
to "Confirm or configure wireless LAN"
for detailed procedures.)
WIRELESS LAN STATUS

Displays wireless LAN status.
STORE DEFAULTS FOR NETWORK TRANSFER

Saves the patient monitor defaults for transfer to
another patient monitor with the same software
version, software package, patient monitor type, and
country code. It stores all patient monitor defaults,
(including WLAN configuration) custom default
names, and 12 SL location and site.
SET LOCATION ID

Enter the location identification for the MUSE system.
SET SITE NUMBER

Enter a site number if your institution has multiple
buildings. A MUSE system can be used as a site
number.
Use to copy patient monitor defaults from one patient
monitor to another patient monitor. Refer to
"Configuration" on page 4-1 for detailed procedures.
Allows you to run a graph test pattern. The choices are
Start and Stop.
Allows changes to the time and date and may affect the
time and date for the entire monitoring network. (Refer to
"Set time and date" on page 4-23 for detailed
procedures.)
on page 4-14
2000966-542D