No Waveform At Central Station - GE Dash 3000 Service Manual

No waveform at central station

6-10
Troubleshooting: No waveform at central station
If you do not have a waveform at the central station:
Ensure the central station software is compatible.

Check all cables for a good connection.

Check the configured alarms and manual print locations at the

patient monitor.
Ensure the care unit name is the same in the patient monitor and in

the central station.
Ensure the internet protocol (IP) addresses are configured correctly.

For a troubleshooting tree with more information, refer to
waveforms or parameters are displayed at the CIC Pro center"
page B-5.
Dash 3000/4000/5000
"Problem: No
on
2000966-542D