Problem: No Waveforms Or Parameters Are Displayed At The Cic Pro Center - GE Dash 3000 Service Manual

Network troubleshooting: Problem: No waveforms or parameters are displayed at the CIC Pro center
Problem: No waveforms or parameters are displayed
at the CIC Pro center
2000966-542D
Before you begin this troubleshooting tree, make sure that the Network
connectivity option is enabled on the Dash patient monitor. To check this
option, access one of the following menus:
Boot Loader > Service Menu > Options Menu (refer to

Loader Service Menu" on page
Dash main menu > MORE MENUS > MONITOR SETUP >

SOFTWARE CONFIGURATION
Dash 3000/4000/5000
4-4) or
"Boot
B-5