Operator Presence Control (OPC)
Switch Replacement (T-Bar)
OPC Switch Removal (T-Bar)
1. Turn the engine off and remove the key from the
ignition.
2. Lift the locking tab on the front of the operator
presence control switch and unplug the harness
connector from the switch (Fig. 1425).
Fig 1425
Floating Deck Mid-Size Service Manual
3. Remove the cotter pin from the upper end of the
control rod (Fig. 1426).
4. Remove the control rod from the control bar/bail
assembly (Fig. 1427).
PICT-1744
ELECTRICAL
Fig 1426
PICT-1679a
Fig 1427
PICT-1682
9
9-15