Delay Module Installation (T-Bar) - Toro 30284 Service Manual

ELECTRICAL
5. Unplug the harness connector from the delay
module (Fig. 1458).
6. Remove the fuse block from the bottom panel and
remove the bottom panel from the machine (Fig.
1459).
9
9-24
Fig 1458 PICT-1805
Fig 1459 PICT-1806
7. Remove the bolt and nut securing the delay module
to the bottom panel (Fig. 1460).
Fig 1460

Delay Module Installation (T-Bar)

1. Position the delay module on the inside of the bot-
tom panel. Install a bolt and nut securing the delay
module to the bottom panel (Fig. 1461).
Fig 1461
Floating Deck Mid-Size Service Manual
PICT-1809
PICT-1809