HYDROSTATIC DRIVE SYSTEM
14. Remove the hydro drive belt (Fig. 0944).
Hydro Drive Transmission Traction Belt
Installation
1. Route the hydro drive belt around the pulleys as
shown (Fig. 0945):
Note: The spring and clutch have been removed for
photo purposes.
6
6-4
Fig 0944
PICT-0564
Fig 0945
PICT-0348a
2. Tighten the nut and shoulder bolt securing the idler
bracket to the frame (Fig. 0946).
Fig 0946
3. Install the bolt, spacer and nut securing the bottom
of the right side plate to the frame (Fig. 0947).
Fig 0947
Floating Deck Mid-Size Service Manual
PICT-0563
PICT-0562