Handle Assembly Replacement (T-Bar); Handle Assembly Removal (T-Bar) - Toro 30284 Service Manual

LINKAGE
19. Apply grease to the side fl ange bearing (Fig. 0547).
4
20. Adjust the Speed Control Linkage. Refer to "Speed
Control Linkage Adjustment" on page 4-121.
21. Initially adjust the Neutral Stud. Refer to "Temporary
Neutral Stud Adjustment" on page 4-122.
22. Adjust the left and right hydro control linkages. Refer
to "Hydro Control Linkage Adjustment" on page
4-123.
23. Adjust the Neutral Stud. Refer to "Neutral Stud
Adjustment" on page 4-126.
24. Check the Control Rod. Refer to "Checking the
Control Rod" on page 4-128.
25. Adjust the tracking. Refer to "Tracking Adjustment"
on page 4-129.
4-66
Fig 0547 PICT-1021
Handle Assembly Replacement
(T-Bar)
Fig 0548

Handle Assembly Removal (T-Bar)

1. Turn the engine off and remove the key from the
ignition.
2. Disconnect the negative battery terminal from the
battery.
Floating Deck Mid-Size Service Manual
fi g. 7 G004812