Opc Switch Position Adjustment - Toro 30284 Service Manual

ELECTRICAL
8. Position the manual tube to the cover bracket. Install
2 screws securing the manual tube assembly to the
control panel and control bracket (Fig. 1511).
9. Slide the fuse blocks onto the control panel cover
bracket (Fig. 1512).
10. Connect the negative battery cable to the battery.
9
9-38
Fig 1511 PICT-1839
Fig 1512 PICT-1836
OPC Switch Position Adjustment (P.G.)
1. Loosen the 2 OPC switch mounting screws (Fig.
1513).
Fig 1513
2. Adjust position of switch mounting plate to obtain the
.18" ± .06" (4.6 + 1.5mm) space between the OPC
switch body and neutral arm with the OPC levers
depressed (Fig. 1514).
A A
Fig 1514
Floating Deck Mid-Size Service Manual
PICT-1864
PICT-1864